What steps are required to enable internet access to Reduxi Controller
Enable internet access so the Reduxi Controller can send data to Reduxi Cloud and allow remote support.
1 Why the controller needs internet access
1.1 When you need it
Enable internet access on the Reduxi Controller in these cases:
- The controller sends data to Reduxi Cloud.
- You allow a remote support connection over VPN.
- You use the secure connection through the Reduxi Cloud application.
1.2 Connection options
Configure the network settings of the controller. The controller supports these options:
2 Wired network
2.1 DHCP connection
The Reduxi Controller uses DHCP as its default network setting.
Text description of this image
Screenshot of the Reduxi Configurator, page Network. Left menu: Users, Devices, Strategies, System (expanded) with Identifier, Network (highlighted), Open VPN, Connector (with plus); Add device and Add strategy buttons; Settings, Profile. Status table: Ethernet IP: 192.168.1.111; Ethernet Netmask: 255.255.255.0; Wireless IP: empty; Wireless Netmask: empty; Proxy: empty; Default route: 192.168.1.1 (192.168.1.111); Internet connection: green circle with white check mark. Below, section Settings with tabs Wired network (selected), Wireless network, Proxy server; field Type: DHCP; button Save.
2.2 Static connection
Enter your network settings based on your network configuration.
Text description of this image
Screenshot of the Settings page of the Reduxi Configurator, tab Wired network (selected; other tabs: Wireless network, Proxy server). Fields: Type: STATIC; IP: 192.168.64.110; Netmask: 255.255.255.0; Gateway: 192.168.64.1; Primary DNS: 8.8.8.8; Secondary DNS: 1.1.1.1; button Save (dark, bottom right).
3 Wireless network
3.1 Connect to a Wi‑Fi network
Go to Settings – System – Network – Internet connection and select the Wireless network tab. Click Scan and choose a network from the list of available Wi‑Fi networks.
Text description of this image
Screenshot of the Settings page of the Reduxi Controller web interface. Tabs: Wired network, Wireless network (selected, shaded grey), Proxy server. Field SSID: empty text field. Button Scan (dark) to the right of the field.
4 Proxy server
4.1 Configure the proxy server
Enter your HTTP proxy host and port.
Text description of this image
Screenshot of the Settings page of the Reduxi Controller web interface, tab Proxy server (selected; other tabs: Wired network, Wireless network). Fields: Http proxy host: empty; Http proxy port: 8080; button Save (dark, bottom right).
5 Check the internet network status
5.1 Status bar
Check the internet access through the status bar in the top right corner.
Text description of this image
Screenshot detail of the status bar icon in the Reduxi web interface: a green chain-link icon with a dark tooltip below it reading Internet connection: Connected.
5.2 Network settings
Alternatively, go to Settings – System – Network – Internet connection. A green check icon marks a working connection.
Text description of this image
Screenshot of the Reduxi Configurator, page Network. Left menu: Users, Devices, Strategies, System (expanded) with Identifier, Network (highlighted), Open VPN, Connector (with plus); Add device and Add strategy buttons; Settings, Profile. Status table: Ethernet IP: 192.168.1.111; Ethernet Netmask: 255.255.255.0; Wireless IP: empty; Wireless Netmask: empty; Proxy: empty; Default route: 192.168.1.1 (192.168.1.111); Internet connection: green circle with white check mark. The Internet connection row is outlined with a red box. Below, section Settings with tabs Wired network (selected), Wireless network, Proxy server; field Type: DHCP; button Save.
✓ Summary
Basics (Point 1): Internet access is needed for Reduxi Cloud, remote support over VPN and the secure connection through Reduxi Cloud.
Wired and wireless (Points 2–3): DHCP is the default. Enter static settings if your network needs them. For Wi‑Fi, scan and select a network.
Proxy (Point 4): Enter the HTTP proxy host and port. Use this only if you need it.
Check (Point 5): Check the status icon in the top right corner or under Settings – System – Network – Internet connection.
→ Common issues
| Issue | Solution |
|---|---|
| No internet connection shown | Check the status under Settings – System – Network – Internet connection. A green check icon marks a working connection. Check the DHCP, static or proxy settings. |
| Wi‑Fi network not in the list | Click Scan again on the Wireless network tab and choose the network from the list. |