⚡ Reduxi · Knowledge Base
Description of specific devices parameters when adding devices in Reduxi Configurator
Parameters that depend on the device type when you add devices in Reduxi Configurator.
Specific devices configuration based on device type
| Address | Represents Modbus address where we have a range from 1-255. We can find Modbus address in the manufacturer's manual for this device. |
| Interface type – HDLC | Defines the type of interface. |
| Block chiper key | Key - set of chars which are unique to the connected device – each device has a unique value which we can read from the device package or in a similar form |
| Authentication key | Authentication key – set of chars which are used for communication with this device and is unique. We can read these values from the device package or in a similar form. |
| Phase | This is used to choose phases – L1; L2; L3 – this field is shown only in specific devices, for example, Shelly Plus 1PM. |
Text description of this image
Screenshot of a Device configuration section in the Reduxi Configurator (dark theme). Fields: Interface type: HDLC; Block cipher key: empty; Authentication key: empty (a text cursor is visible at the end of the label).
Text description of this image
Screenshot of a Device configuration section in the Reduxi Configurator (dark theme) with a single field. Phase: L1. A small white rectangle is visible at the right edge.