Quick installation guide for Reduxi system

First steps for installation and startup of Reduxi system (Reduxi Controller, Reduxi Configurator, Reduxi Cloud)

1. Connect Reduxi Controller to 230V
2. Connect your computer to the internet of the building/client
   1. use WiFi ali
   2. user ethernet cable
3. Go to https://app.reduxi.eu 
4. Client must create an account at https://app.reduxi.eu/auth/register
5. Client gets confirmation mail where the button "Confirm" should be clicked
6. Log in to https://app.reduxi.eu with a new username and password - verify if it works
7. Until the client does not connect Reduxi Controller to Reduxi Cloud on point 16, there will be a notification in Reduxi Cloud saying no controller has been added 
8. Run IPscanner on your computer: https://www.advanced-ip-scanner.com/
9. In IPScanner, search for "Reduxi" and check what IP belongs to Reduxi Controller
10. In browser, enter IP address of the Reduxi Controller, which you found in IPScanner
11. Login to Reduxi Configurator over the browser
    1. username: admin
    2. password: admin
12. On the left side in Reduxi Configurator, select "Settings"
13. On the left side in Reduxi Configurator, select "System"
14. On the left side in Reduxi Configurator, select "System" in the submenu tree and click "Connector"
15. On the left side in Reduxi Configurator, select "System" in the submenu tree and click "Cloud"
16. In the "Connection to the Cloud", enter the username and password that the client used for creating the account at Reduxi Cloud
17. After 1-5 minutes, go to number 6. and reload https://app.reduxi.eu and check if Reduxi Controller is connected/added to Reduxi Cloud account of the client
18. Go to Reduxi Configurator (use IP address got from IPScanner) and start with adding devices
19. On this address, you can find instructions for adding devices, find yours and follow the steps Configurator – English (reduxi.eu)
20. For additional help, go to English (reduxi.eu) and use the search to find an answer to your question